about redwood redwood decks redwood fences redwood builders redwood forests redwood reference library
 

Mark and cut table braces to fit between the table leg assembly and the table top with 45degree angles at both ends. Attach braces to table top with 4-inch screws from below. Drill bolt holes through the "X" of the legs and completely through the angled ends of each 2x4 brace. Countersink the bolt holes to accommodate washers and nuts. Install the bolts and remove the clamps.


Build the benches

 

     
CALIFORNIA REDWOOD ASSOCIATION · 1 888-CALREDWOOD · info@calredwood.org
© 2005, California Redwood Association. All rights reserved.