 |
 |
 |
 |
 |
 |
 |
Cut the legs to 39 inches with 38 degree parallel angles top and bottom. Loosely clamp legs together at their centers with C clamps. Adjust the tension in the clamp until you can open the legs to make a cross with a 28-1/2-inch span at each side, with tops and bottoms aligned. Mark along the sides of each leg where they cross. Remove the clamp and cut the half laps from each 2x4 leg. Reclamp the legs in position. Attach leg assemblies to table top cleat with two 3-1/2-inch x 1/4-inch machine bolts at each connection.
